1. Ask experienced and qualified professionals for construction and installation. When installing, the faucet should try not to bump with hard objects, do not leave cement, glue, etc. on the surface, so as not to damage the surface coating gloss. Pay attention to remove the debris from the pipe and install the faucet.

2. Do not use too much force to switch the tap. Even traditional taps don't need to be screwed to death. In particular, do not use the handle as a handrail to support or use it.

3. The showerhead metal hose of the bathtub faucet should be kept in a natural stretch, and should not be coiled on the faucet when not in use. At the same time, when using or not using, pay attention to the joint between the hose and the valve body not to form a dead angle, so as not to break or damage the hose.

4. In the case of water pressure not lower than 0.02mpaz, after a period of use, if the amount of water is found to decrease, or even the phenomenon of the water heater turning off, you can gently unscrew the screen cover at the faucet outlet. Remove impurities, generally can be restored as ever.

Water tap switch cement